Extang Encore Torno General Installation - Manual

MISSING PARTS?
call Extang at
1-800-877-2588
Any and all needed parts will be
shipped to you directly.
(DO NOT return whole kit to store)
Extang Corporation
5400 S. State Road
Ann Arbor, MI 48108
734 677-0444, Fax: 734 677-8409
Register your warranty at:
extang.com
I t e m N o . 0 2 3 1 - 1 4 0 3 RH P r i n t e d i n U . S . A .
1
0231
If your Truck has a Bed Liner or Rail Caps
Apply foam seal (included) to
front lip of truck bed (below
cab rear window) from driver
side bed rail cap to
passenger side rail cap.
If cab is higher than side rails (liner) either...
Use a credit card or straight edge to see if there is more than
a 1/8” gap between your liner and the sheet metal.
... trim off bed overlap,
or...
... add bed rail caps
designed for your vehicle.
If there is a gap between the cab
rail liner and the side rail caps, cut
a small piece of adhesive foam seal
and insert.
If side rails are higher than cab rail…
Side Rail
Cap
Liner
Do Not apply foam
seal if not required.
• 1/2” Socket Wrench
• 3/4” Sheetmetal Drill Bit
• #2 Phillips Screwdriver
Sheet
Metal
Sheet
Metal
1/8”
Liner