Apple PowerBook G4 (Keyboard Replacement) - Manual (Page 4)

PowerBook G4 (Gigabit Ethernet) Keyboard - 4
11. Touch the computer’s inside framework (a dull gray conductive composite material) to
discharge any static electricity, as shown (Figure 5) .
Important: To avoid electrostatic discharge damage, always ground yourself by
touching the computer’s framework before you touch any parts or install any
components inside the computer. To avoid static electricity building back up in your
body, do not walk around the room until you have completed your installation and
closed the computer.
Figure 5
12. Locate the keyboard cable connector. (Figure 6)
Figure 6
13. Pull up on the connector, from side to side if needed, to disconnect it from the computer.
14. Set the keyboard aside.