HUACAM HCV824 - Manual (Page 13)

www.huacam.com 13
Figure 1: Home Page of HCV824
1. Control Console: PTZ Console controller for ePTZ function.
2. ZOOM: Zoom in or Zoom out during ePTZ operation.
3. FOCUS: Adjust the focus of image (Not Applicable to HCV802).
4. PTZ SPEED/Default Button: Adjust the rotate speed of the control console (Not Applicable);
“D” “Default Button” to reset the video brightness, contrast and saturation value
from (auto or manual) adjusted value to factory default value.
5. BRIGHTNESS: Adjust the image brightness
(will automatic save it unless readjusted)
6. CONTRAST: Adjust the image contrast.
(Same as above, auto save adjusted value)
7. SATURATION: Adjust the image saturation. (Same as above)
8. View Size: Pull down to select between “Window Size” or “Real Size” to display
the embedded video stream at configured video resolution.
9. Configuration Click to enter “Configuration Page” to configure the parameters of
HCV824(Administration privilege required).
10. Language: Click to switch webpage language.
(Current supported: Chinese, English and Russian)