ididit Floor Mount: 1964-66 Mustang Floor Mount User Manual
ididit For the car
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
PROPERTY OF
ididi
T, inc
ididit inc. 610 S. Maumee St. 49286 Tecumseh, MI • PH: 517-424-0577 • FAX: 517-424-7293 • ididitinc.com
Instruction #: 8000010215
REV 12/12
1964-66 Mustang Floor Mount Installation Instructions
For Part #’s 2400010010
1965-66 Mustang Floor Mount:
First slide the clamp up the column. You may
want to wrap tape around the bottom of column
so you don’t scratch it during the installation.
Next, slide the metal Floor Mount onto the
column with the tabs facing upward. Then
slide the gasket onto the column. Once you
have your column in place tighten the Floor
Mount & Gasket to the floor. You can then
tighten the clamp around the column and the
Floor Mount tabs.
*PLEASE NOTE: The enclosed floor mount has a “hot dip” black oxide finish.
It would be important to put a permanent finish on it before you install this floor mount.