JKS 9904 - Manual

JKS part number JKS DESCRIPTION Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: B1 Body Lift™
Part Number: JKS9904
Applications: Wrangler TJ, 1997+
Welcome
Congratulations on purchasing a new B1 Body Lift
from JKS® Manufacturing. We are committed to pro-
viding you with the best products available and your
satisfaction is our first priority.
We hope you enjoy your JKS® purchase and are here
to help if you still have questions after reviewing this
safety information and instructions. Contact us online
at www.jksmfg.com or by phone at 877-533-7557.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Tape Measure
 Medium Strength Threadlocker
 Spray Lubricant (WD-40 or similar)
 Hydraulic Floor Jack
 Sturdy Block of Wood (to protect body)
 Center Punch and Hammer
 1/4” Drill Bit
 Reciprocating Saw or Die Grinder with Cut-Off Wheel
(for trimming fan shroud)
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description QTY
A Dura-Thane Body Puck 11
B 1/2” x 4-1/2” Bolt 6
C 1/2” Flat Washer 6
D 7/16” x 4” Bolt 5
E 7/16” Flat Washer 5
F 1/4” x 3/4” Bolt 2
G 1/4” x 1” Fender Washer 1
H 1/4” Nylock Nut 6
I Pivot Bushing Drop Plate 1
J Extended Radiator Bumper 2
877-533-7557 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036