JKS 2942 - Manual

JKS2942 JKS Adjustable End Links Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable End Links
Part Number: JKS2942
Applications: Jeep Wrangler TJ, 1997-06
Welcome
CONGRATULATIONS on purchasing a set of new Adjust-
able End Links from JKS Manufacturing. We are committed
to providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE WITH aftermarket swaybars. Install
product with Original Equipment swaybar only.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Tape Measure
 3/4” Open-End Wrench
 Medium Strength Threadlocker
 Wheel Bearing Grease
 Metal Cutting Tool * (such as die grinder with cutting
wheel or appropriate saw for cutting connecting rod)
 Factory Service Manual (recommended) *
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description QTY
A Connecting Rod 2
B 1/2” Jam Nut 4
C Bushing Eyelet 4
D 1/2” Poly Hourglass Bushing 4
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036