King of Fans 82820 HV-20G 20 HIGH VELOCITY - Manual (Page 4)

WALL BRACKET MOUNTING
Your fan may be wall mounted using a Wall Bracket provided.
1. Mount the Wall Bracket with the 2.Loosen Set Screw on the Wall
1/4” diameter by 2-1/2” long Bracket, save it for Step 4.
Lag Bolt (provided).
3. Hold fan at upright Position, place 4. Tighten back the Set Screw from
stand on Wall Bracket Hook So that Step 2 to lock the Stand in position.
the Rubber Feet on the Stand rest
against the wall.
5. Tilt Fan Head to desired angle. 6. Pass the Supply Cord through
Cord Warp Clip.
OPERATING INSTRUCTIONS:
1. Set fan on a dry, stable and flat surface.
2. Connect power plug to any standard 120-volt AC outlet. Caution: Make sure
the Speed Control is in the”0” (off) position.
3. Pass the Supply Cord through Cord Warp Clip.
4. Change the setting on the speed control to the desired operating speed –off ”0”,
low “1”, medium “2” or high “3”.