Manley ENHANCED MID FREQUENCY PULTEC EQUALIZER - Manual (Page 12)

12
SPECIFICATIONS
Maximum Input (Bypass through Line Amplifier) +30 dBv
Maximum Output +30 dBv
Headroom (referenced to +4 dBv) 26 dB
Frequency Response: 10 Hz to 70 kHz +/- 0.5 dB
THD & Noise (1kHz @ +4 dBm) .015%
Noise Floor (Gain set to minimum) -80 dB Wideband
Signal to Noise 126 dB typical
Maximum Gain (via trim on back) 5 dB to -5 dB
Maximum EQ Boost 12 dB low mids, 10 dB high mids
Maximum EQ Cut 12 dB (10 db some freqs) (see curves)
Power Consumption .35 Amps @ 115 VAC
Fuse 1 Amp Slo-Blo
Size (2U) 19" x 1.75" x 10"
Actual Weight 10 Lbs
Shipping Weight 13 Lbs
Manley Enhanced Pultec Mid Frequency Equalizer