MJM Yachts 29z Outboard - Manual (Page 16)

CHAPTER 3 PROPULSION SYSTEM
- 16 - 29z
Shift Friction Brake Adjustment Hub Cap
3.13
ENGINE DATA DISPLAY
This single display is used instead of traditional gauges. The words VOLVO PENTA EVC will
appear briefly after turning the switch ON.
DISPLAY CONTRAST Press Button 5 to set contrast to one of five levels. Then EXIT.
CONFIGURATION MENU Press Button 5 for longer than 3 seconds. See page 39 of the Volvo
Owner’s Manual for configuration menu structure/options.
.
ENGINE DATA (button 1) is programmed to show RPM, Coolant Temp, Voltage and Fuel Level
on 1
st
page, then will show other info next time button is pushed.
MULTI DATA (button 2) Shows operating info in 4 different windows. The user can choose the
info to be displayed as numbers or analog, shifting between modes as button is pushed.
TRIP/FUEL INFO (button 3 - See Volvo Operating Manual page 44)
HISTOGRAPHS (button 4) - Values can be established for a range of 2 minutes to 8 hours.
3.14
ELECTRONIC THROTTLE/SHIFT CONTROL
There are 3 positions for the handle. FORWARD THRUST,
NEUTRAL and REVERSE THRUST.
SUDDEN MOVEMENT HAZARD This Electronic control lever
governs both throttle and shifting functions. The boat may start
to move abruptly when the marine gear is engaged: Ensure
the boat is clear of all obstacles forward aft. Cautiously shift to
the FORWARD position then quickly back to NEUTRAL
position. Observe whether the boat moves as you expect.
FRICTION BRAKE The control lever has a friction
brake which may be adjusted. After stopping the engine,
move the control lever forward to access a groove in the
hub. Use a screwdriver to remove the plug, then use an 8 mm wrench to make the action stiffer
(clockwise) or to loosen it (counter-clockwise).