Penske Racing Shocks 8975-DRAG - Manual (Page 11)

PS-8975-DRAG (Double Adjustable) 2010/2011
11
Factory Settings:
Adjusters:

Typically, adjusters will be set in the “midrange” of the damper when arriving from the factory.
This may be different depending on specific set ups. Precise settings will be documented on the
build sheet and/or dyno sheet.

Gas Pressure - This can vary from 50 psi to 200 psi, depending on the application and setup.
Generally, higher compression damping will necessetate higher gas pressure. This will also be
specified on the build sheet and/or dyno sheet.
Full Hard
(C-0, R-0)
Full Soft
(C-48, R-48)
FACTORY SETTING
(C-24, R-24)
FACTORY SETTINGS:
COMPRESSION: =-24 / REBOUND: -24