Poolmaster 83380 Hampton Lounge - Manual

83380
B
A
A
B
B
B
B
F
F
E
D
D
C
C
B
B
E
C
F
E D
G
Hampton
LOUNGE
User Manual / Manual del Usuario / Manuel d’utilisation
Contents / Contenido / Contenu
(1) (A) Mattress / Colchoneta / Matelas
(6) (B) 14” Rods / Varillas de 14” / Tiges de 36 cm
(2) (C) 19” Rods / Varillas de 19” / Tiges de 48 cm
(2) (D) 3-way Joint Connectors / Conectores triples de ensamble / Raccords en T
(2) (E) Elbow Joint Connectors / Codo de ensamble / Raccords coudés
(2) (F) Joint Connectors / Conectores de ensamble / Raccords droits
(1) (G) Canopy / Toldo / Baldaquin
(1) Repair patch / Parche de reparación / Rustine
Assembly
1. Prior to your set up, make sure you select a flat surface, free from any sharp objects that may puncture or tear the vinyl.
2. Remove all components from the packaging and ensure that you have all the parts listed above.
3. Slowly inflate the mattress. It is recommended that you use a hand pump or foot pump for inflation. Product should be fully inflated before
setting up the canopy. Do NOT use a high-pressure air to inflate and do NOT overinflate. Close all valves by pressing tightly shut.
4. Insert two 14” rods (B) into the integrated holders located on the sides of the head of the mattress.
5. Insert both of the 3-way joint connectors (D) onto the ends of the previously inserted rods.
6. Connect two 14” rods (B) with a joint connector (F) and insert them into one side of the 3-way connectors.
7. Connect both 19” rods (C) into the other opening of the 3-way connectors.
8. Insert an elbow joint connector (E) to the ends of both 19” (C) rods.
9. Join the last two 14” rods (B) together using the last joint connector (F) and insert the ends into the elbow joints.
10. You should now have a complete canopy frame.
11. Slide the pocket of the main canopy top over the front frame and pull all the way down the back.
Velcro around the two rods that are inserted into the mattress.
Storage and Maintain
Clean the product with plain water and leave it in a cool, shady place to dry and fold back into original box for storage. Do NOT use any alkali or acid
detergent to clean the product. Do NOT leave the product exposed in direct sunlight for prolonged periods of time as this will shorten the life of the
product.
Repair Instructions
• Small holes and punctures can be repaired using the included repair patch
• If leak is larger than 1”, it is suggested that you use a vinyl repair kit (sold separately), such as Poolmaster’s 2oz / 4oz Vinyl Repair Kits #30280 or 30279
• Locate the leak.
• Deflate the mattress.
• Wipe clean the surrounding area of the leak.
• Cut included patch to shape and larger than leak area. Cover and press firmly. Let rest for 24 hours before inflating.
770 Del Paso Road, Sacramento, CA 95834-0308