APC ADSL 4-Port - Manual (Page 12)

ADSL 4-Port Ethernet USB Wireless-G Router User Guide
ADSL 4-Port Ethernet USB Wireless-G Router User Guide Page 12 of 52
3.2 ADSL Router Overview
3.2.1 Front Indicators
Fig 1-2 shows the front indicators of the Wireless-G router.
Figure 1-2 : Front Indicators
1. POWER - Lights up when power is supplied to the ADSL Router.
2. ETHERNET (E1 ~ E4) - Lights up when the Ethernet cable is properly connected from
your ADSL Router to the Ethernet Card. It flickers when the ADSL is
transmitting/receiving data.
3. WIRELESS - Flickers when the Wireless LAN is operational.
USB - Lights up when the USB cable is properly connected from your ADSL Router to
the USB slot. Lights Off when the USB cable is not connected or it is properly
disconnected.
DSL - LED lights off when no Telephone jack (RJ-11) is connected. Flickers when the
ADSL Router is trying to establish a connection with the ADSL Service Provider
(Training). Steady Green LED lights up when the ADSL connection is established.
6. Internet - Green LED lights up when the PPP connection is established. Lights off
when no PPP connection.
1 2 3 5
4 6