Owner's manual, Pa601 commercial amplifier, Wiring the pa601 – Atlas Sound PA601 User Manual
Page 9: Security cover option
Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2006 ATLAS SOUND LP
Printed in U.S.A.
00106
ATS002264 RevA 01/06
PP
OWNER'S MANUAL
PA601 COMMERCIAL AMPLIFIER
9
WIRING THE PA601
Speaker Outputs - Use 2 conductor unshielded wire of the appropriate gauge. If you are unsure about
this, contact Atlas Sound Tech Support at 1-800-876-3333. Make sure you know how many speakers you
need and what tap value you intend to use.
Balanced Input - Use 2 conductor w/shield for low level signals (20-22 gauge is best). Maintain the
proper polarity, + to +, – to –, and shield to ground.
Unbalanced Inputs and Outputs - Pre-made RCA cables can be purchased from vendors to simplify
interconnection to external devices.
SECURITY COVER OPTION
In order to prevent unauthorized operation of the PA601, optional security covers are available which take
the place of the front panel knob. After the PA601 has been installed and is operating as desired, grasp
the front panel knob and pull straight out from the front panel. Replace the knob with a security cover,
Atlas part number AAVCC-5.
F7,&'7cfb_\_[h
Power
On
Off
Signal
Power
Peak
Master
Front Panel
Knob
or
Security Cover