Ridetech 12176799 User Manual
Page 6
13. The airsprings can now be installed. Be sure to use Teflon tape or paste on the airline fitting threads to
avoid air leaks. Also be sure to use the provided plate under the airsprings for proper support.
11. The photo to the left shows the new
drivers side emissions canister mounting
[provided] that is necessary to clear the new
upper airspring mounts. This also shows the
upper airspring mount attachment through
the OEM shock mount and 2 other existing
holes.
10. The emissions canister will also need to be
modified slightly as shown to accept new mounting
bracketry.
NOTE: Not all models will have this configuration of
the emissions canister.
12. Passenger side bottom view of the
upper airspring mount. Hidden is the ear
that attaches to the C notch. There will be 2
bolts that are installed from the top into a
threaded bung on the airspring mount and
an ear that is bolted to the C notch. The
fourth hole should line up with the OEM
upper shock mount