Ridetech 11386799 User Manual
Page 8
350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Your AirBar installation is now basically complete. Recheck all fasteners for proper tightness and
check the airsprings for abrasion throughout the full range of suspension travel. NOTE: If you are
using an aftermarket wheel and tire combination, the overall height of your tires MUST be at least
28”. Shorter tires will allow the chassis to touch the ground at full deflation. This IS NOT an
acceptable condition and MUST be resolved by either using taller tires or a taller bumpstop. Taller
tires are recommended
.
IT IS THE FINAL RESPONSIBILITY OF THE INSTALLER/CUSTOMER TO ENSURE THAT THE
AIRSPRING DOES NOT RUB ON ANYTHING AT ANYTIME AND TO ENSURE THAT PROPER
GROUND CLEARANCE IS MAINTAINED AT ALL TIMES!