Ridetech 11167199 - Manual

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part # 11167199
67-69 GM “F” Body AirBar
Components:
1
90000527 Upper cradle assembly
1 90002077 Lower axle bracket - Driver
1 90002078 Lower axle bracket - Passenger
2 90001624 Lower billet Shockwave mount
2 90001617 Lower Shockwave stud - .625”
4 90002067 Aluminum spacer – lower shock bearing
2 90000144 Axle tabs (Short Tab-Inside)
2 90000524 Axle tabs (Tall Tab-Outside)
2 90000523 Shock block off plate
2 90001001 Upper bars – TW 7.375” (C-C length 9.250”)
1 90001029 Lower bar – WW 24.75” – Passenger side
1 90002328 Lower bar – WW24.75” – Driver side
2 99250001 ¼”-28 straight grease fitting
2 90001589 Threaded Kevlar lined Heim end
4 90000552 Aluminum spacers for Heim end
2 99752004 ¾” SAE jam nut – for rod end
4 90001942 Rubber bushings – pressed into bars
4 90001090 Poly bushing for lower bar
2 90000526 Inner bushing sleeve – lower bar
2 90001844 Trunk backer plate for sway bar bracket
2 70010694 Jig brackets for upper bar installation
2 90001107 Front Tab Backer
Hardware Kit # 99010017:
2
1/2”-13 x 1 ¼” Gr.5 bolt Billet mount to axle bracket
2 1/2"-13 x 1 ¾” Gr.5 bolt Billet mount to axle bracket
4 1/2”-13 Nylok nut Billet mount to axle bracket
6 5/8”-11 x 2 ¾” Gr.5 bolt Bar ends
6 5/8”-11 Nylok jam nut Bar ends
2 1/2"-13 x 2 ¼” Gr.5 bolt Upper Shockwave mount
2 1/2"-13 Nylok jam nut Upper Shockwave mount
18 3/8”-16 x 1” Thread forming bolt Upper cradle assembly
30 3/8” SAE flat washer Upper cradle assembly/Front cradle backer
8 7/16”-20 Nylok nut T bolts for lower axle mount
8 3/8”-16 x 1 ¼” Gr.5 bolt Trunk backer plate for sway bar bracket
8 3/8”-16 Nylok nut Trunk backer plate for sway bar bracket/Front cradle backer
2 3/8”-16 x ¾” Gr. 5 bolt Upper bar installation jig
2 3/8”-16 nut Upper bar installation jig