Ridetech 19003005 - Manual (Page 4)

Ride Height
A
B
Top
air inlet
Bottom
Compressed Extended
Double
Convoluted
Tapered
Sleeve
Top
Sleeve
Rolling
Top
AIRSPRING DIMENSION CHART
PART# TYPE Capacity
@100psi
Compres
s Height
Ride
Height
Max.
Height
Max
Diameter
Bolt Pattern
255C
[F6957]
Double
Convoluted
2040# 3”[built in
bumpstop]
4.5”-5.5” 7” 6.5” A=1.75 B=.875
224C
[F0335
Double
Convoluted
3150# 3” 5”-6” 8” 8.0” A=2.75 B=1.312
26C
[F7325]
Double
Convoluted
3400# 3” 5”-6” 10” 8.5” A=2.75 B=1.312
20
[F6908]
Double
Convoluted
4790# 3” 7”-8” 11” 9.9” A=3.50 B=1.75
F9000 Tapered Sleeve 1500# 4.5 8”-9.5” 13” 5” A=2.75 B=1.312
F9002 Tapered Sleeve 1500# 4.5 7”-8.5” 12” 5” A=2.75 B=1.312
F9003 Tapered Sleeve 1500# 4.5 6”-7” 11” 5” A=2.75 B=1.312
F9010 Tapered Sleeve 2000# 6.5” 10.5”-11.5” 16” 6.5” .750 SAE/.250npt
7012 Rolling Sleeve 1020# 4” 7.5”-8.5” 13” 5” .750SAE/.125npt
7076 Rolling Sleeve 800# 2.25” 5”-6” 9” 4” .750SAE/.125npt
CAUTION!!! EXCEEDING THESE DIMENSIONS MAY RESULT IN SUDDEN AIRSPRING
FAILURE! PROPER CLEARANCES MUST BE MAINTAINED AT ALL RIDE HEIGHTS AND
STEERING ANGLES. BUMPSTOPS MUST BE USED TO LIMIT SUSPENSION TRAVEL BEFORE
THESE DIMENSIONS ARE EXCEEDED.