Ridetech 11339000 - Manual (Page 2)

1. To install the panhard bar remove
5 bolts from the right half of the axle
cover. Place the panhard axle
bracket over the cover and secure
with 5/16”-18 x 1 ¾” bolts, flat
washers and lock washers.
2. Slide the heim end over the stud
and then the spacer. Secure the
assembly wit
h a 7/16” Nylok nut.
3. The other end of the panhard bar
will bolt into the factory mount with a
5/8” x 2 ¾” bolt and Nylok jam nut
supplied.