Ridetech 11379103 User Manual
Page 2
Advertising
FRONT SWAY BAR REMOVAL
1. Remove end links from each side of the vehicle.
2. Support the stock sway bar and remove the brackets that attach the bar to
the frame.
3. Remove the bar.
4. Spread a light coat of supplied grease onto the frame mount bushings I.D.
and install on the bar with the slit side of the bushing facing to the front.
Install the brackets over the bushings.
5. Attach the front sway bar brackets and bar. Torque to 20ft. lbs.
6. Install the supplied end links. Torque to 13ft. lbs.
FRAME MOUNT
BUSHING AND
BRACKET
ENDLINK
Advertising