Ridetech 11329101 - Manual

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part # 11329101
78-88 GM “G” Body Rear MuscleBar
1 Rear sway bar
4 7/16” x 3” bolts
4 7/16” Nylok nuts
8 7/16” flat washers
Rear Bar Installation
1. Look at the current sway bar installation.
2. Support the vehicle by the frame with lift jacks or jack stands, allowing the
suspension to be unsupported.
3. Remove the four bolts holding the sway bar to the trailing arms.
4. Remove the factory sway bar from the vehicle.
5.
Place the new swaybar up to the trailing arms and push the bolts through the sway bars.
6. Tighten up the new bar.
7. Double check that all fasteners are tightened.