ATI Technologies Preseeder 365 - Manual (Page 28)

TROUBLESHOOTING GUIDE
22
SYMPTOM REMEDY POTENTIAL CAUSE
Rotor does not turn. Tractor attachment drive is not engaged. Engage tractor Attachment Drive.
Control and Brake Lever
Obstruction jammed between the rotor Clear obstruction from the rotor.
and frame.
Main Drive Belt not adjusted correctly. Adjust Main Drive Belt. (See
Main Drive Belt adjusting).
Main Drive Belt is worn out. See dealer for appropriate
service.
Rotor stalls too easily. Working depth too deep. Reduce working depth.
Ground speed too fast. Reduce ground speed.
Main Drive Belt not adjusted correctly. Adjust Main Drive Belt. (See
Main Drive Belt adjusting).
STORAGE
ORDERING PARTS
When the seeding season is over, the
Preseeder tiller should be thoroughly checked so
a minimum amount of work will be required to
put it back in operation for the next season. The
following recommendations are offered to aid in
storing the tiller correctly.
1. Clean the tiller thoroughly.
2. Lubricate the tiller. Check the fluid levels;
fill to proper level if necessary.
3. Replace badly worn or damaged parts
obtained from your authorized dealer.
4. Touch-up paint to prevent rust and main-
tain the tiller’s appearance.
5. Store in a clean, dry place.
If ordering parts becomes necessary for
your Preseeder tiller, call your authorized deal-
er to obtain correct parts replacement informa-
tion. Please have model number, serial number,
part number, and other necessary information
ready when ordering parts.
IMPORTANT: Always order parts using part
numbers from the Preseeder
Parts Manual supplied with
your unit. Replacement manu-
als may be obtained at
www.preseeder.com/service.