Installation instructions – Ridetech 11280702 User Manual
Page 2
Advertising
350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Installation Instructions
1. Fasten the upper shock T-bar to
the bottom of the frame using two
5/16” x 1” bolts, Nylok nuts and flat
washers.
2. Use the new cantilever pin
supplied to attach the bottom of the
shock to the axle.
1. Cantilever Pin
2. 5/8” SAE Washer
3. Aluminum Bearing Spacer
4. .625” Bearing
5. Aluminum Bearing Spacer
6. Factory axle bracket
7. ½” Lock Washer
8. ½” SAE Nut
Advertising