Ridetech 11050702 - Manual (Page 2)

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
2. Attach the bottom of the shock to
factory shock stud using the ½” Nylok
nut & flat washer supplied. Install
one aluminum spacer on each side of
the bearing.
1. Attach shock T-Bar to frame using
3/8” x 1 ¼” bolts, Nylok nuts and flat
washers.