Ridetech 11050701 - Manual (Page 2)

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
2. Attach the bottom of the shock to factory
shock stud using the ½” Nylok nut & flat
washer supplied. Install one aluminum
spacer on each side of the bearing.
1. Attach shock T-Bar to frame using 3/8” x
1 ¼” bolts, Nylok nuts and flat washers.