The care and feeding of your new shockwaves – Ridetech 12045400 User Manual
Page 3
The care and feeding of your new ShockWaves
1. Although the ShockWave has an internal bumpstop, DO NOT DRIVE THE VEHICLE
DEFLATED RESTING ON THIS BUMPSTOP. DAMAGE WILL RESULT. The internal
bumpstop will be damaged, the shock bushings will be damaged, and the vehicle shock
mounting points may be damaged to the point of failure. This is a non warrantable situation.
2. Do not drive the vehicle overinflated or “topped out”. Over a period of time the shock valving
will be damaged, possibly to the point of failure. This is a non warrantable situation! If you
need to raise your vehicle higher that the ShockWave allows, you will need a longer unit.
3. The ShockWave is designed to give a great ride quality and to raise and lower the vehicle. IT
IS NOT MADE TO HOP OR JUMP! If you want to hop or jump, hydraulics are a better choice.
This abuse will result in bent piston rods, broken shock mounts, and destroyed bushings. This
is a non warrantable situation.
3. Do not let the ShockWave bellows rub on anything. Failure will result. This is a non
warrantable situation.
4. The ShockWave product has been field tested on numerous vehicles as well as subjected to
many different stress tests to ensure that there are no leakage or durability problems. Failures
have been nearly nonexistent unless abused as described above. If the Shockwave units are
installed properly and are not abused, they will last many, many years. ShockWave units
that are returned with broken mounts, bent piston rods, destroyed bumpstops or
bushings, or abrasions on the bellows will not be warrantied.