Rubbermaid 9VWD16 - Manual (Page 7)

2
3
Wet Use Mode
Slide wet/dry selector left to expose dry port.
12 13
ENGLISH
1
Wet pick-up: Slide wet/dry selector right to expose “wet tank inlet”. Dry pick-up: Slide wet/dry selector left to expose “dry tank inlet”.
Dry Use Mode
Wet/Dry Selection
2
25
1 U
Slide wet/dry selector to desired function. Insert hose into
port. Turn hose clockwise to lock.
26
K
L
I
Slide wands through slots on caddy; nest wands onto posts
on bumper.
24
J
Attach upper handle to diagonal supports. Ensure spring
loaded buttons align with holes in upper handle; snap into
place.
This vacuum cleaner has separate wet/dry tanks. This allows switching from wet pick-up to dry pick-up without having to empty
the tank or change filters. Dry debris will collect in the inner tank and wet debris will collect in the outer tank. Ensure that the small
foam filter and HEPA filter/HEPA foam sleeve are in place.
Insert hose into “dry tank inlet” and turn clockwise to lock.
1
2
2
U
Attach bent and/or straight wand and desired accessory.
3
K
I
U
Plug power cord into outlet. Turn power switch on. (Vacuum
cleaner is ready for use.) Once complete, turn power switch
off and unplug power cord from outlet.
2
4
1
Dry Mode Operation
23
L
Hang power cord on cord hook.
Assembly (cont.)