Avaya Definity 6211 User Manual

Important safety instructions, 6211 telephone quick reference, Save these instructions

Advertising
background image

The 6211 telephone is a single-line set capable of operating

behind any Avaya Business Communications System

(BCS) switch including DEFINITY, MERLIN LEGEND, and

DIMENSION PBXs.

6211 Telephone Quick Reference

Issue 2, June 2001

555-233-715

Comcode 700211626

Figure 1. The 6211 Telephone, Top View
Telephone Features:

1

The

Data Jack; labeled

) — You can use this jack on

the 6211 telephone for connecting a device such as a

modem to your telephone.

2

The

Ringer volume control — On the 6211 telephone,

set the 3-position Ringer volume control to raise or lower

the volume of the tone ringer. The volume control is

labeled

.

3

The

Message Light — The red Message light, on the

6211 telephone, flashes when you have a message and

whenever a call rings at your telephone. This light is

labeled

.

4

The

Handset volume control (labeled

) — On the

6211 telephone, use this Handset volume control button

to raise or lower the volume of the handset receive level.

To raise the volume, press the upper half of the button

labeled

; to lower the handset volume, press the lower

half of the button labeled

.There are four available

volume levels.

5

Dial pad

6

Line jack (on the bottom of the telephone)

IMPORTANT SAFETY INSTRUCTIONS

The most careful attention has been devoted to quality standards

in the manufacture of your new telephone. Safety is a major

factor in the design of every set, but, safety is YOUR

responsibility too.
Please read carefully the helpful tips listed below and on the next

page. These suggestions will enable you to take full advantage of

your new telephone. Then, retain these tips for later use.

Use

When using your telephone equipment, the following safety

precautions should always be followed to reduce the risk of fire,

electric shock, and injury to persons.

Read and understand all instructions.

Follow all warnings and instructions marked on the telephone.

This telephone can be hazardous if immersed in water. To

avoid the possibility of electric shock, do not use it while you

are wet. If you accidentally drop the telephone into water, do

not retrieve it until you have first unplugged the line cord from

the modular jack. Then, call service personnel to ask about a

replacement.

Avoid using the telephone during electrical storms in your

immediate area. There is a risk of electric shock from lightning.

Urgent calls should be brief. Even though protective measures

may have been installed to limit electrical surges from entering

your business, absolute protection from lightning is impossible.

If you suspect a natural gas leak, report it immediately, but use

a telephone away from the area in question. The telephone’s

electrical contacts could generate a tiny spark. While unlikely, it

is possible that this spark could ignite heavy concentrations of

gas.

Never push objects of any kind into the equipment through

housing slots since they may touch hazardous voltage points or

short out parts that could result in a risk of electric shock.

Never spill liquid of any kind on the telephone. If liquid is

spilled, however, refer servicing to proper service personnel.

To reduce the risk of electric shock, do not disassemble this

telephone. There are no user serviceable parts. Opening or

removing covers may expose you to hazardous voltages.

Incorrect reassembly can cause electric shock when the

telephone is subsequently used.

7

— Press the red

button, on the telephone,

in order to put a call on hold while you perform another

task.

8

— Press

, on the telephone, in order to

redial the last number that you dialed from the dial pad.

9

— Press

, on the telephone, instead of

pressing the switchhook for features such as Conference

with business communications systems.

10

Handset cord jack

11

Handset

Note: The 6211 telephone has only Touch-Tone Dialing.

This telephone also supports the

Timed Disconnect

feature. No special settings are needed to engage these

features.

Service

1

Before cleaning, unplug the telephone from the modular wall

jack. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

2

Unplug the telephone from the modular wall jack. Be sure to

refer servicing to qualified service personnel when these

conditions exist:
— If liquid has been spilled into the telephone.
— If the telephone has been exposed to rain or water.
— If the telephone has been dropped or the housing has

been damaged.

— If you note a distinct change in the performance of the

telephone.

SAVE THESE INSTRUCTIONS

HEARING AID COMPATIBILITY

This telephone is Hearing Aid Compatible (HAC) and thus has

“HAC” printed on it.

When you see this warning symbol on the product,

refer to these instructions for more information

before proceeding with installation.

!

1

Advertising