Alpine CDA-9847 - Manual (Page 11)

10
-EN
M.I.X. (Random Play)
Press 5 ( ) in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 ( ) again.
CD mode :
↓
M.I.X. : Track are played back in
random sequence.
↓
M.I.X.
*3
: The tracks on all the CDs in the current
magazine will be included in the random
playback sequence.
↓
(off)
*3 When a CD changer equipped with the All M.I.X. function is
connected
• If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA mode :
↓
M.I.X. : Only files in a folder are played back in
random sequence.
↓
M.I.X. : Files are played back in random sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played back
in random sequence, and playback shifts to
the next disc.
↓
(off)
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In the CD changer mode, press F/SETUP to illuminate the
“
” indicator, and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In the CD changer mode, press F/SETUP twice to illuminate the
“
” indicator, and go to the step above within 10 seconds.
Scanning Programs
Press 6 ( ) to activate the Scan mode.
The first 10 seconds of each track (file) will be played back in
succession.
To stop scanning, press 6 ( ) and deactivate the Scan
mode.
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In the CD changer mode, press F/SETUP to illuminate the
“
” indicator, and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In the CD changer mode, press F/SETUP twice to illuminate the
“
” indicator, and go to the step above within 10 seconds.
Searching from CD Text
Tracks can be searched and played using the CD text on the disc. In
the case of discs and changers that do not support text, searches can
be made using the track numbers.
1
Press SEARCH/Q.S. during play.
This will set the search mode.
2
Turn the Rotary encoder to select the desired
track, then press the Rotary encoder.
This will play the selected track.
• Press and hold SEARCH/Q.S. for at least 2 seconds in the
search mode to cancel. Or, the search mode will be canceled when
an operation has not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
File/Folder Name Search (concerning MP3/WMA)
You can display and search for the folder and file name while
listening to the file currently being played back.
1
Press SEARCH/Q.S. to select File Name Search
mode or Folder Name Search mode in MP3/WMA
mode.
Folder Name Search mode
2
Turn the Rotary encoder within 10 seconds to
select the desired folder.
3
Press the Rotary encoder to play back the first
file in the selected folder.
• Folder Name Search mode is canceled by pressing and holding
SEARCH/Q.S. for at least 2 seconds.
• While in Folder Name Search mode, press SEARCH/Q.S. to
switch to File Search mode.
• "NO FILE" is displayed for 2 seconds if the folder or playlist that
is selected by the Folder Name Search mode contains no files.
• “ROOT” is displayed for a folder that does not have a folder
name.
• Folder Name Search cannot be made during M.I.X. play.