Sper Scientific 800017R Mini Humidity / Temp Monitor - Manual

SPER SCIENTIFIC
Mini Humidity/Temp Monitor - 800017R
Use in small spaces such as desiccators, incubators, humi-
dors, and refrigerators. Simultaneously displays temperature
and humidity. Recall min/max temperature and humidity
over any time period or have it automatically reset every 24
hours. Powered by one button cell battery (included).
BATTERY INSTALLATION: Open
the battery cover and insert a fresh
LR44 or comparable button cell bat-
tery with the positive (+) side up. Re-
place the cover.
SETTING THE INTERNAL CLOCK
1.In normal mode (not min/max), press the RESET button
for 2 seconds until the clock screen is displayed and the
hour digits flash.
2.Press the RECALL button to set the hour 0~23.
3.Press the RESET button again and the minute digits flash.
4.Press the RECALL button to set the minutes 00~59.
5.Press the RESET button again to exit the clock setup.
OPERATING PROCEDURES:
1.Slide the Temperature Selector (Fig. 1) to C or F.
2.Slide the Daily On/Off Selector (Fig. 2) to the desired
setting.
• Daily On retains the max/min for 24 hours.
• Daily Off retains the max/min between manual resets.
C F
Temp. Battery Tripod
Selector Compartment Stand
Fig. 1, back
SPER SCIENTIFIC
Mini Humidity/Temp Monitor - 800017R
Use in small spaces such as desiccators, incubators, humi-
dors, and refrigerators. Simultaneously displays temperature
and humidity. Recall min/max temperature and humidity
over any time period or have it automatically reset every 24
hours. Powered by one button cell battery (included).
BATTERY INSTALLATION: Open
the battery cover and insert a fresh
LR44 or comparable button cell bat-
tery with the positive (+) side up. Re-
place the cover.
SETTING THE INTERNAL CLOCK
1.In normal mode (not min/max), press the RESET button
for 2 seconds until the clock screen is displayed and the
hour digits flash.
2.Press the RECALL button to set the hour 0~23.
3.Press the RESET button again and the minute digits flash.
4.Press the RECALL button to set the minutes 00~59.
5.Press the RESET button again to exit the clock setup.
OPERATING PROCEDURES:
1.Slide the Temperature Selector (Fig. 1) to C or F.
2.Slide the Daily On/Off Selector (Fig. 2) to the desired
setting.
• Daily On retains the max/min for 24 hours.
• Daily Off retains the max/min between manual resets.
C F
Temp. Battery Tripod
Selector Compartment Stand
Fig. 1, back
SPER SCIENTIFIC
Mini Humidity/Temp Monitor - 800017R
Use in small spaces such as desiccators, incubators, humi-
dors, and refrigerators. Simultaneously displays temperature
and humidity. Recall min/max temperature and humidity
over any time period or have it automatically reset every 24
hours. Powered by one button cell battery (included).
BATTERY INSTALLATION: Open
the battery cover and insert a fresh
LR44 or comparable button cell bat-
tery with the positive (+) side up. Re-
place the cover.
SETTING THE INTERNAL CLOCK
1.In normal mode (not min/max), press the RESET button
for 2 seconds until the clock screen is displayed and the
hour digits flash.
2.Press the RECALL button to set the hour 0~23.
3.Press the RESET button again and the minute digits flash.
4.Press the RECALL button to set the minutes 00~59.
5.Press the RESET button again to exit the clock setup.
OPERATING PROCEDURES:
1.Slide the Temperature Selector (Fig. 1) to C or F.
2.Slide the Daily On/Off Selector (Fig. 2) to the desired
setting.
• Daily On retains the max/min for 24 hours.
• Daily Off retains the max/min between manual resets.
C F
Temp. Battery Tripod
Selector Compartment Stand
Fig. 1, back
SPER SCIENTIFIC
Mini Humidity/Temp Monitor - 800017R
Use in small spaces such as desiccators, incubators, humi-
dors, and refrigerators. Simultaneously displays temperature
and humidity. Recall min/max temperature and humidity
over any time period or have it automatically reset every 24
hours. Powered by one button cell battery (included).
BATTERY INSTALLATION: Open
the battery cover and insert a fresh
LR44 or comparable button cell bat-
tery with the positive (+) side up. Re-
place the cover.
SETTING THE INTERNAL CLOCK
1.In normal mode (not min/max), press the RESET button
for 2 seconds until the clock screen is displayed and the
hour digits flash.
2.Press the RECALL button to set the hour 0~23.
3.Press the RESET button again and the minute digits flash.
4.Press the RECALL button to set the minutes 00~59.
5.Press the RESET button again to exit the clock setup.
OPERATING PROCEDURES:
1.Slide the Temperature Selector (Fig. 1) to C or F.
2.Slide the Daily On/Off Selector (Fig. 2) to the desired
setting.
• Daily On retains the max/min for 24 hours.
• Daily Off retains the max/min between manual resets.
C F
Temp. Battery Tripod
Selector Compartment Stand
Fig. 1, back