Sper Scientific 800021 RH/Temp SD Card Logger - Manual (Page 16)

- 16 -
SETUP MODE
ENTER to save the selection.
Thermometer Type K/J
1. Enter the thermometer type
function from Setup Mode (see
page 13). “tYPE” appears on the
LCD.
2. Press ▲ or ▼ to select K or J.
Press ENTER to save the
selection.
Temperature Units
1. Enter the temperature units
function from Setup Mode (see
page 13). “t-CF” appears on the
LCD.
2. Press ▲ or ▼ to select C
(degrees Celcius) or F (degrees
Farhenheit). Press ENTER to
save the selection.
Sampling Time
The sampling time is the time allotted