Spyder Auto Dodge Charger 06-09 Headlight with LED - Manual (Page 2)

Open the hood, there are 8 clips to remove on the
top of the front bumper. Use a panel popper and
carefully remove the clips.
Remove the Screw that is holding the Fender, using
a 10mm socket. On both ends
Remove the nine screws that secure the belly pan to
the underbody using a 7mm socket.
Turn the wheel away and remove three clips
from the wheel cover. On both ends of the
vehicle.
Once you remove the wheel cover, there are
two screws on the each side of the bumper (side
bumper).
Then remove one nut on both sides in order to
remove the bumper off (body frame).
Before removing the bumper, remove the corner
bumper lights on both side. Push it out care-
fully, it should slide out.
STEP 1: REMOVING BUMPER