Spyder Auto HALO and LED - Manual (Page 2)

There is two red(positive) and two black(negative)
wires coming from the HALO Rings. Pair the color
together by source.
Connect the HALO wires to the L.E.D. wires using
a quick connect. Red and White wires are Positive.
Black is Negative.
Negative connection.
Use the Crimper to close the quick connects to-
gether. Check the wiring after connecting, make
sure it is connected properly.
Check all connections before installing the
headlights onto the vehicle. Connect the Posi-
tive and Negative wires to the battery terminal
to see if all HALO and L.E.D.’s are lid up.
STEP:2 PRE-WIRING