Aiwa AM-NX1 - Manual (Page 30)

30
Power sources
You can use the recorder on house current
or as follows.
• a nickel metal hydride rechargeable
battery NH-14WM
• LR6 (size AA) alkaline dry battery
(used with the supplied dry battery case)
It is preferable to use the recorder on
house current when recording for a long
time. When powering the recorder with
batteries, make sure the rechargeable
battery is fully charged or that the alkaline
dry battery is new to prevent battery
exhaustion in the middle of a recording
operation.
When to replace the batteries
When the dry battery or rechargeable
battery is weak, flashing
e or “LOW
BATT” appears in the display. Replace the
dry battery or charge the rechargeable
battery.
The battery level indicator is approximate.
It may be more or less than the indication
depending on the operating condition or
the operating environment.
Note
Stop the recorder before replacing the battery.
Battery life 1)
The battery life may be shorter due to
operating conditions, the temperature of
the location, or the type of alkaline dry
battery being used.
When playing
(Unit: approx.hours)(JEITA 2) )
1) Measured with the power save mode on (see
“Preserving battery power (Power Save
Mode)” (page 26)).
2) Measured in accordance with the JEITA
(Japan Electronics and Information
Technology Industries Association) standard.
Batteries SP
Stereo LP2
Stereo LP4
Stereo
Nickel metal
hydride
rechargeable
battery
3)
3) When using a 100% fully charged nickel metal
hydride rechargeable battery.
31 38 45
LR6 (SG)
Sony alkaline
dry battery
4)
47 57 69
Nickel metal
hydride
rechargeable
battery
3)
+ One LR6
(SG)
4)
80 95 114
4) When using a Sony LR6 (SG) “STAMINA”
alkaline dry battery (produced in Japan).