Declaration of conformity, Quick start guide: solus 4, solus 8, solus 16, Software installation – Symetrix Solus User Manual

Page 3: Arc pinout, Arc distance table

Advertising
background image

3

QUICK START GUIDE: Solus 4, Solus 8, Solus 16

Declaration of Conformity

6408 216th Street SW

|

Mountlake Terrace, WA 98043 USA

T

+1.425.778.7728

F

+1.425.778.7727

|

www.symetrix.co

Special note: for multiple ARCs on single chain, the listed

value is assumed to be the cable length between each

device. For example, a value of 600’ means 600’ between

the DSP unit and the first ARC, 600’ between the first and

second ARCs, etc. The total cable length will be the listed

segment length multiplied by the number of ARCs on the

chain.

Declaration of Conformity

We,

Symetrix Incorporated, 6408 216th St. SW,

Mountlake Terrace, Washington, USA, declare under our

sole responsibility that the product:

Solus•4, Solus•8 and Solus•16

to which this declaration relates, is in conformity with the

following standards:

IEC 60065, EN 55103-1, EN 55103-2,

FCC Part 15, RoHS

The technical construction file is maintained at:

Symetrix, Inc.

6408 216th St. SW

Mountlake Terrace, WA, 98043 USA

The authorized representative located within the European

Community is:

World Marketing Associates

P.O. Box 100

St. Austell, Cornwall, PL26 6YU, U.K.

Date of issue: April 20, 2011 (Solus•4 and Solus •8)

Date of issue: September15, 2011 (Solus•16)

Place of issue: Mountlake Terrace, Washington, USA

Authorized signature:

Dane Butcher, President, Symetrix Incorporated.

Software Installation

SymNet Designer is the software that provides real-time set-

up and control of Solus from a Win dows PC environment.
Use one of the following procedures to install SymNet

Designer on your computer.
From the CD-ROM:
1. Insert the CD into your computer’s CD-ROM drive.
2. Open “My Computer”. The “My Computer” icon is

typically on your desktop or in the “Start” menu.

3. Double click on your CD-ROM drive. This is typically drive

“D:\”. If your CD-ROM drive isn’t “D:\”, then substitute its

drive letter.

4. Double-click “Setup.exe”.
From the Symetrix web site (http://www.symetrix.co):
1. Download the SymNet Designer software installer from

the Symetrix web site.

2. Double-click on the file you just downloaded and follow

the on screen directions to install.

After installing the software, refer to the Help File for full

connection and configuration information.

ARC Pinout

The RJ45 jack distributes power and RS485 data to one

or more ARC devices. Uses standard straight-through UTP

CAT5/6 cabling.

1

!

Warning! Refer to the RJ45 Warning for compatibility

information.
The Symetrix ARC-PSe provides serial control and power

distribution over standard CAT5/6 cable for systems with

more than 4 ARCs, or, when any number of ARCs are

located long distances from a Integrator Series, Jupiter or

SymNet DSP unit.

Port Settings: 38.4 kbaud, 8 data bits, 1 stop bit, no parity,

no flow control.

ARC Distance Table

The following table provides at-a-glance cable length

limitations based on DC power (the table is not relevant if

only RS-485 is distributed) and assumes 24 gauge CAT5/6

cabling. The lengths for multiple ARCs on a single chain

assume equal distance for each cable segment between

ARCs. Table is intended for quick reference only. For more

detailed configuration scenarios, refer to the ARC Power

Calculator available from the support section of the Symetrix

web site.

ARC-EXK ARC-EX4e

1

4

2

3

1

3

2

3

2

3

ARC-SWK

ARC-MIC

ARC-XLR

MAXIMUM NUMBER OF ARC EXPANSIONS UNITS POSSIBLE PER

MODULAR ARC BASE UNIT

MODULAR ARC BASE UNIT

ARC-K1e

ARC-SW4e

number of ARCs

on chain

ARC-2e/ARC-2i ARC-K1e ARC-SW4e ARC-SWK ARC-XLR ARC-MIC

1

1000'

3250'

3250'

1800'

3250'

3250'

2

370'

1200'

1200'

600'

1200'

1200'

3

190'

600'

600'

325'

600'

600'

4

115'

350'

350'

200'

360'

360'

CABLE SEGMENT LENGTH LIMITATIONS FOR ARC POWER OVER CAT-5/6 CABLE

ARC TYPE

1
2
3
4
5
6
7
8

1
2
3
4
5
6
7
8

1 • AUDIO (+)
2 • AUDIO (-)
3 • COMMON GROUND
4 • RS-485 DATA (A)
5 • RS-485 DATA (B)
6 • COMMON GROUND
7 • POWER (+V)
8 • POWER (+V)

Note:

The ARC Audio line may be grounded at the

Symetrix rack-mount device and the ARC wall panel
to provide additional distance.

ARC PORT PINOUT

8

7

6

5

4

3

2

1

Pair 1

Pair 3

Pair 4

Pair 2

Advertising