Telenav for Verizon Supported Devices: v5.5 for BlackBerry Tour - Manual (Page 23)

Address – Speaking In
Instead of typing in your address, you can use the voice-recognition
system to dictate the address. TeleNav’s auto voice entry system can
be utilized in two different ways:
• If you set your Speech Input method in the Share & More >>
Preferences area to “Call In,” TeleNav will place a call to the
Voice Address Input System. To use this system, follow the
voice prompts to dictate an address. When you hang up the
call, you will be directed back to the screen you were on. The
new address can be found in your Recent Places list.
• If you set your Speech Input method in the Share & More >>
Preferences area to “Speak In Directly,” you can dictate your
address from within TeleNav as described below:
1. On the Drive To menu, highlight Address and click the trackball to
expose the menu. Then choose “Speak It.”
2. Follow the voice prompts to dictate your address. The prompts will
vary, depending on the menu from which you accessed the “Speak
It” option.
TIP: Hold down the Space key and wait for the beep. Then speak clearly
into your phone. Release the Space key after you are finished talking.
3. The matching address is then displayed on your screen for
confirmation. The address is also automatically saved to your
Recent Places list.
NOTE: If you are using the “Call In” method and have never placed a call
on your new device, the “Speak It” feature may not work. To resolve this
issue, simply place a call from the device’s Applications menu. When
prompted, type in your home area code and continue with the call. The
“Call in Address” feature will now work after you re-launch TeleNav.
Speak In Address with Bluetooth Headset
You can use a Bluetooth headset while dictating an address.
1. Press the “$” (Speaker) button on your BlackBerry device from any of the Speak It screens.
2. The BlackBerry will automatically search for any paired Bluetooth headsets.
3. Hold down the headset button while talking instead of the Space key on the BlackBerry device.
4. Press “$” (Speaker) again to toggle the audio through the BlackBerry’s speaker.
© TELENAV, INC. 2003-2009 PAGE 23 OF 68