Telenav for Verizon Supported Devices: v4.1 for Palm Treo 700w - Manual (Page 16)

© TELENAV 2003-6 PAGE 16 OF 29
Navigation and Directions
If the handheld is not registered, upon attempting to use this service, you will be directed to the registration process
described above.
Upon entering Navigation, the destination Address Selector form described above appears first. You select, find, or
enter an address, and are taken to the destination address confirmation screen.
On the trip confirmation screen you can change the route origin or you can change the route type (fastest, shortest,
avoid highway, prefer highway or pedestrian.)
When you are ready to get the route select Go.
The first option is “Current Location”, and the second option is “Somewhere
else”.
Selecting the first option invokes the Navigation function using your current
location determined by getting a GPS fix as the origin. There will be brief activity
to get an up-to-the-minute GPS location fix, followed by a network transaction
while the handheld sends the fix and destination address to the TeleNav servers
that respond with the routing data.
Selecting the second option takes you to the origin Address Selector so you can
pick, find, or enter the origin address. (These screens are shown above).
Static Route and Map Summary Modes
If you specified “Somewhere else” while on the trip confirmation page and entered in a different origin address there
will be brief activity message displayed when the directions are downloaded.
A static route view will then be displayed, similar to the route summary view shown above. To view a map
summary of your trip press the Menu key and select Map Summary.
NOTE: The map summary mode is only available when accessing static routes.