Abit AN9 32X - Manual (Page 28)

3. Click “Disabled front panel jack
detection”, and then click “OK” to confirm.
S/PDIF Connection:
In the motherboard package you can find one audio daughter-card and one optical-fiber cable.
• S/PDIF Input Connection:
1. Remove the rubber protection-cap. Attach one end of the optical cable with the 3.5mm
Optical-to-Stereo adapter, and have it plugged into the [Line-In] jack on this
daughter-card. (This jack is served for either optical or line input.)
2. Connect the other end of the optical cable to the [Digital-Out] (SPDIF-Out) jack on your
digital multimedia device.
• S/PDIF Output Connection:
1. Remove the rubber protection-cap. Plug one end of the optical cable into the
[SPDIF-Out] jack on this daughter-card.
2. Connect the other end of the optical cable to the [Digital-In] (SPDIF-In) jack on your
digital multimedia device.
2-18