Telenav for AT&T Supported Devices: v5.5 for BlackBerry smartphones - Manual (Page 17)

To use the Drive To menu, do the following steps:
1. Select “Drive To” from the TeleNav GPS Navigator Main Menu.
2. Select one of the following options from the Drive To menu as
shown in the illustration to the right and discussed below.
TIP: Coaching for each screen is available using the Menu >> Help
selection.
Resume Trip
This option appears if you have previously interrupted a navigation
session. Your destination and route settings are saved if you exit
navigation while on a route so that you may easily resume the trip later.
The settings for a paused trip will clear if you begin a new route.
© TELENAV, INC. 2003-2009 PAGE 17 OF 67