Asus DualPentum III 1U Rackmount Server AP1400R - Manual (Page 39)

AP1400R Server User’s Manual 39
Floppy Drive
The system comes with the floppy drive already installed. Refer to
this section when you need to replace the floppy drive.
Floppy Drive Mounting
Place the floppy drive to
the drive tray and secure
it with four screws on the
areas indicated by circles.
Floppy Drive Installation
Place the floppy drive on
its bay (top of the SCSI
HDD2). Secure the drive
to the chassis with two
screws on the areas
indicated by circles.
Connect the floppy disk
cable to the back of the
floppy drive and the other
end to the floppy drive
connector on the
motherboard.