Tivax MiTraveler 10R - Manual (Page 5)

4
2. Getting Started
2.1 Battery Recharge
MiTraveler has one built-in battery, which should be fully charged (for at least 8 hours)
before the initial use.
Power Adaptor
Connect the power adaptor to the power source and the other to the equipment jacket to
recharge.
Recharging
1. Plug the power adaptor and the recharging indicator will be Red, which means it’s recharging.
When the battery is full, the indicator will be Off. Unplug the power adaptor, the indicator will
stay Off.
2. During recharging, you could still use the equipment.
Notice:
The recharging time will be longer if the equipment is in operation.
2.2 Memory Card
Insert the Memory Card:
- Insert the memory card into the slot and press until a click is heard.
- The upper left of the screen will indicate: Preparing memory device.
Browsing the Memory Card:
- Run the My pad application to show all files under the root directory
- Select SD 1 (TF card 1, Micro SD card) to browse the contents in the card.
Unplug the Memory Card: