Adder Technology X50 - Manual (Page 6)

wel
c
ome
c
ontent
s
inst
all
ation
op
era
tion

r
t

er
in
orma
tion
5
Installation
Connections
Installation of the X50 modules is straightforward with minimal configuration
requirements in most cases.
• Connections.at.the.local.module
• Connections.at.the.remote.module
Important
Do not attach a USB hub to the X50 remote, nor plug the X50 local module into
another USB hub. To do so will reduce the maximum cable length over which the
system will extend USB; also, some USB hubs may not provide enough power to
operate the local unit.
HT
1 ON
4
2 3
Mounting
The X50 modules offer two main mounting methods:
• Supplied four self-adhesive rubber feet
• Rack mount brackets - see below