Turbo Action 70250 Command Center User Manual
Page 2
Advertising
Part #70250
2
1/89,10/99
Fig. #1
Fig. #2
G.M. & Ford Shifter
Fig. #3
Chrysler Shifter
STEP #9:
Install Push to Start Switch first on the start side of cover.
STEP #10:
Install three more toggle switches on the start side of cover.
STEP #11:
Suggest using 14 gauge wire for your wiring to the switches.
STEP #12:
Be sure all wires are clear of shifter moving mechanism.
STEP #13:
Be sure no wires are shorting out from one switch to another.
STEP #14:
Suggest drilling 3/16” hole in corner as shown in FIg. #5. This way you can run your wire from your
roll control into cover for a clean and neat appearance.
Advertising