Tuff Country 14810 - GM 88-98 K1500 / K2500 6lug 4 - Manual

PART NUMBER : 14810
1988 - 1998 CHEVY / GMC 1500 6 LUG
4” SUSPENSION SYSTEM WITH FRONT SPINDLES
PARTS LIST:
Part
# Description Qty.
14810-01 Lower One Piece Sub Frame 1
14810-03 Driver Side Differential
Relocation Bracket 1
14810-04 Passenger Side Differential
Relocation Bracket 1
14810-05 Torsion Bar Drop Brackets 2
C4I-114M Passenger Side Spindle 1
C4I-115M Driver Side Spindle 1
BL401 4” Lifted Blocks 2
5U-9262S 9/16” x 2 3/4” x 12 5/8” Square U-Bolts 4
9804 1” Axle Spacers 2
P98 Rear Shock Clevis Mounts 2
BLR01 Rear Brake Line Extension Bracket 1
BLR08 Front Brake Line Extension Bracket 2
14810SL Sleeve bag 1
14810PL Poly bushing bag 1
14810NB Hardware Bag 1
916NW 9/16” U-bolt High Nuts & Washers 1
14810INST Instruction Sheet 1
INSTALLATION MANUAL
4” I.F.S. SUSPENSION SYSTEM
1988 - 1998
CHEVY / GMC 1500 6 LUG
PART # 14810
Sj051904rev.03
Congratulations on your selection to purchase a Tuff
Country EZ-Ride Suspension System. We at Tuff
Country EZ-Ride Suspension are proud to offer a
high quality product at the industries most
competitive pricing. Thank you for your confidence in
us and our product.
For a list of all parts, please refer to the Parts
Description Page, at the end of the Installation
Manual.
Make sure to use thread locker or locktite on all new
and stock hardware associated with the installation
of this suspension system.
It is the responsibility of the installers to make sure
that the rear view mirror hanger is hung from the rear
view mirror. The rear view mirror hanger has
instructions on proper post installation procedure.
The Tuff Country EZ-Ride Suspension product safety
label that is included in your kit box must be installed
inside the cab in plain view of all occupants.
IMPORTANT CUSTOMER INFORMATION
Tuff Country EZ-Ride Suspension highly
recommends that a qualified or a certified mechanic
performs this installation.
If you desire to return your vehicle to stock, it is the
customers responsibility to save all stock hardware.
It is the responsibility of the customer or the
mechanic to wear safety glasses at all times when
performing this installation.
It is the customers/installers responsibility to read
and understand all steps before installation begins.
OEM manual should be used as a reference guide.
This vehicles reaction and handling characteristics
may differ from standard cars and/or trucks.
Modifications to improve and/or enhance off road
performance may raise the intended center of gravity.
Extreme caution must be utilized when encountering
driving conditions which may cause vehicle
imbalance or loss of control. DRIVE SAFELY! Avoid
abrupt maneuvers: such as sudden sharp turns
which could cause a roll over, resulting in serious
injury or death.
It is the customers responsibility to make sure that a
re-torque is performed on all hardware associated
with this suspension system after the first 100 miles
of installation. It is also the customers responsibility
to do a complete re-torque after every 3000 miles or
after every off road use.
After the original installation, Tuff Country EZ-Ride
Suspension also recommends having the alignment
checked every 6 months to ensure proper tracking,
proper wear on tires and front end components. Tuff
Country EZ-Ride Suspension takes no responsibility
for abuse, improper installation or improper
suspension maintenance.