Connecting to a dolby digital amp, Connections – AudioBahn Universal Mount DVD Player AVDVD1P User Manual
Page 21
Connections
20
Connecting to a Dolby Digital Amp
DVD disc must be recorded in Dolby Digtal.
You must have Dolby Digital decoder or 6 channel Amp, 5 speakers and 1 bass woofer.
You must set Digital Out of AC3 at "Raw" in Audio Setting
This product is manufactured by technical co-operation with Dolby Laboratories
this symbol and trademark are reserved for Dolby Laboratories.
Dolby Laboratories Inc. All rights Reserved.
C
C
a
a
u
u
t
t
i
i
o
o
n
n
When connecting an amplifier equipped with Dolby Digital, connect it in the same way as
shown above
When connecting it, refer to the Audio system's manual.
Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers
may be damaged by a sudden high volume level.
Turn off the receiver before you connect or disconnect the DVD player's power cord.
If you leave the receiver power on, the speakers may be damaged.
Video Cable
Center Speaker
Sub
Speaker
Front
Speaker
(left)
Rear Speaker
(left surround)
Front
Speaker
(right)
Rear Speaker
(right surround)
Audio
Cable
75 ohm Coaxial Cable
or
To digital audio output
Receiver equipped with a
Dolby digital decoder
Rear Panel