Tuff Country 14965 - GM 00-03 Suburban / Tahoe K1500 4 kit User Manual
Page 15
the ground.
See Illustration # 29
140. If you were not able to attach the new sway bar end links to the stock location in step # 137, perform this step
now that the weight of the vehicle is on the ground.
See Illustration # 33
141. Check and double check to make sure that all steps were performed properly. And then check again. Check
and make sure that all new and stock hardware has been torque to proper torque specification. Refer to the torque
specification at the end of the installation manual.
142. Take vehicle directly to an alignment shop for proper alignment.
Congratulations Installation Complete
Torque Settings:
5/16”
15—18
ft
lbs.
3/8”
28—32
ft
lbs.
7/16”
30—35
ft
lbs.
1/2”
65—85
ft
lbs.
9/16”
85—120
ft
lbs.
5/8”
95—130
ft
lbs.
3/4”
100—140
ft
lbs.
Also refer to the Vehicle owners manual for proper torque specifications on any stock
hardware.
Special Post Installation Procedure: Once the new Suspension System has been installed.
Check the fluid level in the front differential. Top off the fluid with proper differential fluid.
On occasion customer may find burping of fluid coming out of the front vent tube.