Tuff Country 16830 - GM 92-98 K1500 Suburban and 2-door Tahoe 6 kit User Manual

Page 11

Advertising
background image

93. Install the tire wheels and safely lower the vehicle to the ground.

94. If you were not able to install the rear brake line extension bracket to the rear differential in step # 78, perform
this step now that the weight of the vehicle in on the ground.

95. If you were not able to install the new rear sway bar end links in step # 90, perform this step now that the weight
of the vehicle is on the ground.

CONGRATULATIONS INSTALLATION COMPLETE

SPECIAL NOTE: AN EXHAUST MODIFICATION IS NEEDED. ALSO A FRONT END ALIGNMENT IS REQUIRED

ONCE THE EXHAUST MODIFICATION HAS BEEN PERFORMED REPLACE THE STOCK FRONT DRIVE LINE
BACK INTO THE STOCK LOCATION AND SECURE USING THE STOCK HARDWARE THAT WAS REMOVED
IN STEP # 5

Special Post Installation Procedure: Once the new Suspension System has been installed. Check the fluid
level in the front differential. Top off the fluid with proper differential fluid. On occasion customer may find
burping of fluid coming out of the front vent tube.

Advertising