Tuff Country 16962 - GM 00-03 Suburban / Tahoe K1500 6 STRONG kit - Manual (Page 3)

Hardware bag 16965SL includes:
Description Quantity
S10019 (.750” x .563” x 1.190”) 2
S10020 (.750” x .563” x 1.750”) 2
S10026 (.680” x .500” x 1.500”) 4
S10058 (.875” x .500” x 2.080”) 4
S10074 (.700” x .563” x 1.500”) 2
S10082 (.875” x .563” x 2.080”) 1
S10110 (.750” x .563” x 9.500”) 2
Hardware bag 16965PL includes:
Description Quantity
PB6199 (bump stop) 2
PB2408 (poly bushing) 10
MO2220 (poly bushing) 12
PB10630018 (Sway bar bushing) 8
S10113 (Sway bar end link washer) 8
SUW-916 (9/16” u-bolt washer) 2
BLR01 (brake line relocation bracket) 2
5161B (5/16” x 1” bolt) 1
14WA (1/4” USS flat washer) 2
516UN (5/16” unitorque nuts) 1
LUBE (poly lube pack) 2
Hardware bag 14959NB1 includes:
Description Quantity
1/2” x 1 1/2” bolts 6
7/16” USS flat washers 12
1/2” unitorque nuts 6
Hardware bag 16965NB includes:
Bag # 1
Description Quantity
5/16” USS flat washers 2
3/8’ unitorque nuts 2
3/8” x 3/4” self threading bolts 10
5/16” x 1” bolt 1
10 mm x 55 mm bolts 12
10 mm lock washers 16
10 mm x 60 mm bolts 4
1/4” USS flat washers 2
5/16” unitorque nuts 1
All thread rod 2
Bag # 2
Description Quantity
7/16” x 1 1/4” bolts 2
7/16” x 1 1/2” bolts 2
7/16” x 3” bolts 1
7/16” unitorque nuts 5
3/8” USS flat washers 10
Bag # 3
Description Quantity
1/2” x 1 1/2” bolts 1
1/2” x 2 1/2” bolts 4
1/2” x 3 1/2” bolts 4
1/2” unitorque nuts 11
7/16” USS flat washers 18
1/2” x 15” bolts 2
Bag # 4
Description Quantity
9/16” x 1 3/4” bolts 2
9/16” x 3” bolts 4
9/16” x 3 1/2” bolts 5
9/16” unitorque nuts 11
1/2” USS flat washers 26
Bag # 5
Description Quantity
5/8” x 4 1/2” bolts 2
5/8” x 5 1/2” bolts 2
5/8” unitorque nuts 4
9/16” USS flat washers 8
Special note: Before installation begins, it is the
customers/installers responsibility to make sure that
all parts are on hand. If any parts are missing, please
feel free to call one of our customer service
representatives @ (801) 280-2777.
Special post installation procedure: Tuff Country EZ-
Ride Suspension highly recommends adding a
minimum of 1 pint, but no more that 1 1/2 pints, of
proper front differential fluid into the front differential.
To achieve this, you may have to fill the differential
with it on its side or you may have to insert the fluid
through the vent tube opening. On occasion, the
customer may find burping of fluid coming out of the
front vent tube.
Recommended tools selection:
Torsion bar puller
(Part # 7822A / LSP code: 769 006 21)
Cut off wheel
Sawzall
Torque wrench
Standard socket set
Standard wrench set
Metric socket set
Metric wrench set
Tape measure
Hydraulic floor jacks