Tuff Country 20823 - Ford 80-04 carrier bearing drop kit - Manual

PART NUMBER : 20823
1980 — CURR “F” SERIES VEHICLES
ADJUSTABLE CARRIER BEARING DROP
PARTS LIST:
Part
# Description Qty.
FCB-02 One Piece Adjustable Drop 1
28023NB Hardware Bag 1
20823INST Instruction Sheet 1
INSTALLATION MANUAL
ADJUSTABLE CARRIER
BEARING DROP
1980 — CURR
“F” SERIES VEHICLES
PART # 20823
SJ100802
Congratulations on your selection to purchase a Tuff
Country EZ-Ride Suspension System. We at Tuff
Country are proud to offer a high quality product at
the industries most competitive pricing. Thank you
for your confidence in us, and our product.
Before installation begins, it is the customers/
installers responsibility to make sure that all parts
are on hand. If any parts are missing, please feel free
to call one of our customer service representative @
(800) 288-2190.
Make sure to use locktite on all new and stock
hardware associated with this installation.
It is the responsibility of the installers to make sure
that the rear view mirror hanger is hung from the
rear view mirror. The rear view mirror hanger has
instructions on proper post installation procedures.
Torque Settings
5/16” 15—18 ft lbs.
3/8” 28—32 ft lbs.
7/16” 30—35 ft lbs.
1/2” 65—85 ft lbs.
9/16” 85—120 ft lbs.
5/8” 95—130 ft lbs.
3/4” 100—140 ft lbs.
IMPORTANT CUSTOMER INFORMATION
Tuff Country EZ-Ride Suspension highly
recommends that a qualified and or certified
mechanic performs this installation.
If you desire to return your vehicle to stock, it is the
customers responsibility to save all stock hardware.
This vehicles reaction and handling characteristics
may differ from standard cars and/or trucks.
Modifications to improve and/or enhance off road
performance may raise the intended center of
gravity. Extreme caution must be utilized when
encountering driving conditions which may cause
vehicle imbalance or loss of control. DRIVE SAFELY!
Avoid abrupt maneuvers, such as sudden sharp
turns which could cause a roll over, resulting in
serious injury or death.
It is the customers responsibility to make sure that a
re-torque is performed on all hardware associated
with this suspension system after the first 500 miles
of installation. It is also the customers responsibility
to do a complete re-torque after every 3000 miles or
after every off road use.
After the original installation, Tuff Country EZ-Ride
Suspension also recommends having the alignment
check every 6 months to ensure proper tracking,
proper wear on tires and front end components. Tuff
Country EZ-Ride Suspension take no responsibility
for abuse, improper installation or improper
suspension maintenance.
It is the responsibility of the customer or the
mechanic to wear safety glasses at all times when
performing this installation.
It is the customers/installers responsibility to read
and understand all steps before installation begins.
OEM manual should be used as a reference guide.
The Tuff Country EZ-Ride Suspension product safety
label that is included in your kit box must be
installed inside the cab in plain view of all
occupants.