Tuff Country 20774 - Ford 83-97 Ranger radius arm brackets User Manual
Page 4
Installation completed!
Special note: After the completion of the installation, Tuff Country EZ-Ride Suspension recommends taking the vehicle to an
alignment shop and having a proper front end alignment performed.
Tuff Country EZ-Ride Suspension recommends that a complete re-torque is done on all bolts associated with this suspension
system. It is the customers responsibility to make sure that a re-torque is performed on all hardware associated with this sus-
pension system after the first 100 miles of installation. It is also the customers responsibility to do a complete re-torque after
every 3000 miles or after every off road use. Neglect of following these steps could cause brackets to come loose and cause
serious damage to the suspension system and to the vehicle.
Tuff Country EZ-Ride Suspension packages (2) sets of instruction sheets with this box kit. (1) is for the installer and (1) is for
the customer. The (1) for the customer has some post installation procedure literature and it is the installers responsibility
to make sure that the customer receives a copy of the installation manual along with the literature.
If you have any questions or concerns, please feel free to contact Tuff Country or your local Tuff Country dealer.
R404 / Qty. 1
Passenger side radius arm
relocation bracket
R403 / Qty. 1
Driver side radius arm
relocation bracket