Tuff Country 26813 - Ford 80-96 6 rear box kit - Manual (Page 5)

18. Locate the new rear brake line relocation bracket, (1)
5/16” x 1” bolt (2) 1/4” USS flat washers, (1) 5/16” unitorque
nut and (1) e-clip from hardware bag 24813NB. Slide the
open end of the new brake line over the stock brake line.
Push the new bracket up on the cross member and careful-
ly drill a 5/16” hole into the cross member. Secure the new
brake line into the previously drilled hole and secure using
the new 5/16” x 1” bolt and hardware. Make sure to use
thread locker or loctite and torque to 12 ft lbs. Now install the
new e-clip into the stock location.
19. Locate the stock sway bar end link hardware. Working on
the driver side, secure the stock sway bar end link to the
stock sway bar using the stock hardware. Make sure to add
some thread locker or loctite and torque to 32 ft lbs. Repeat
procedure on the passenger side.
20. Check and double check to make sure that all steps were
performed properly and check again.
21. Install the tires and wheels and carefully lower the vehi-
cle to the ground.
Congratulations, installation complete!
Special note: After the completion of the installation,
Tuff Country EZ-Ride Suspension recommends taking
the vehicle to an alignment shop and having a proper
front end alignment performed.
Tuff Country EZ-Ride Suspension recommends that a
complete re-torque is done on all bolts associated with
this suspension system. It is the customers responsibil-
ity to make sure that a re-torque is performed on all
hardware associated with this suspension system after
the first 100 miles of installation. It is also the customers
responsibility to do a complete re-torque after every
3000 miles or after every off road use. Neglect of follow-
ing these steps could cause brackets to come loose and
cause serious damage to the suspension system and to
the vehicle.
Tuff Country EZ-Ride Suspension packages (2) sets of
instruction sheets with this box kit. (1) is for the installer
and (1) is for the customer. The (1) for the customer has
some post installation procedure literature and it is the
installers responsibility to make sure that the customer
receives a copy of the installation manual along with the
literature.
If you have any questions or concerns, please feel free
to contact Tuff Country or your local Tuff Country deal-
er.